7 Installation of controller software
7.0.4 Create a new Robot Controller System
146 A 3HAC 16245-1
7.0.4 Create a new Robot Controller System
Setting up the
system
Step Action Illustration/info
1. Start RobInstall as described in
section "How to use Robinstall".
2. Choose New to create a new
Robot Controller system as
shown in the figure.
xx0100000179
3. Enter a name for the new control-
ler system. Select a saving loca-
tion or use the default directory,
normally "Program Files\ABB
Robotics\system" (see the figure
below, position 1).
xx0100000180
4. Enter the RobotWare key or add
from file. If added from a file, files
with the extension .kxt should be
used (see the figure above, posi-
tion 2).
5. Press OK . The configured system
will be displayed in the next win-
dow (see the figure below).
xx0100000181
To Next Page
Loading...
