8 Robot controller
8.0.4 Boot Disk Window
160 A 3HAC 16245-1
8.0.4 Boot Disk Window
When is it
shown?
The Boot Disk window will be displayed when Boot Disks is pressed in the Start window as
shown in the figure in section "Start window".
How to create
boot disks
Information on how to create boot disks from RobInstall can be found in section "Create Boot
Diskettes from Robinstall".
Load the system
Step Action Illustration/Info
1. Insert the correct diskette in the
floppy disk drive and press OK . If
the diskette is alright, the system
will be loaded.
CANCEL removes all previously
loaded data and returns to the
Start window as shown in the fig-
ure in section "Start window".
xx0100000170
To Next Page
Loading...
