8 Robot controller
8.0.7 System selection window
3HAC 16245-1 A 163
8.0.7 System selection window
When is it
shown?
The Select System window will be displayed when Select System is pressed in the Start
window as shown in the figure in section "Start Window".
xx0100000171
How to select
system
The window shows all systems installed on the controller mass storage memory.
CANCEL returns to the Start window as shown in the figure in section "Start Win-
dow".
Step Action Illustration/Info
1. Select by moving the X to a
desired system and press OK .
The system will reboot with the
new system and then present the
Welcome window as shown in the
figure.
xx0100000172
To Next Page
Loading...
