9 System directory structure
9.0.1 Media pool in the PC
3HAC 16245-1 A 169
Chapter 9: System directory structure
9.0.1 Media pool in the PC
Directory All RobotWare System Packages and Option Packages are stored in a media pool directory
as shown in the table below.
Two revisions of the same system package may exist in the pool. By default, after having
installed RobInstall, a directory "MediaPool" will be found in the directory Program
Files\ABB Robotics\, and will also be the current one. However any directory in the structure
can be set up as the current media pool in the Preference window (see section "Robinstall
Preferences").
xx0200000156
Naming
conventions
Each package is stored in a directory, the name of which is an article number ending with the
sub-number and with the revision number as shown in the table above. All the system packs
and option packs in one media pool must have the correct revision numbers in their directory
names. Thus a later revision can be loaded into the program pool, to be added to the old one,
without changing the article number.
Art. no./folder
name
Description
3HAXaaaa-1.00 RobotWare System Pack 3HAXaaaa-1, rev 00
3HAXbbbb-1.02 RobotWare System Pack 3HAXbbbb-1, rev 02
3HAXcccc-1.01 ABB Robotics external option program 3HAXcccc-1, rev 01
3HYZdddd-1.00 OEM customer external option program 3XYZdddd-1, rev 00
To Next Page
Loading...
