10 Calibration
10.5.5 Retrieving offset values
3HAC 16245-1 A 203
10.5.5 Retrieving offset values
Procedure Use this instruction when retrieving new offset values for axis 1 during definition of a new
calibration position.
Step Action Illustration
1. Press the "Miscellaneous" button.
xx0100000194
2. Select the System parameters window by pressing ENTER.
xx0100000200
3. Select Motor from the Types menu.
4. Select axis 1 and press ENTER.
xx0100000200
5. Note the Cal offset value.
To Next Page
Loading...
