10 Calibration
10.5.4 New calibration offset, axis 1
202 A 3HAC 16245-1
10.5.4 New calibration offset, axis 1
Procedure Use this instruction when changing to a new calibration offset for axis 1 during definition of
a new calibration position.
Step Action Illustration
1. Press the "Miscellaneous" button.
xx0100000194
2. Select the Service window by pressing
ENTER.
xx0100000200
3. Select Calibration from the View menu.
The calibration window appears.
xx0100000201
4. Select Calibrate from the Calib menu.
5. Select axis 1 (no other axes).
6. Confirm by pressing OK twice.
To Next Page
Loading...
