Need help?Do you have a question about the ABB MagMaster and is the answer not in the manual?
General| Type | Magnetic Flow Meter |
|---|---|
| Process connection | Wafer, Flanged |
| Lining material | PTFE, hard rubber |
| Electrode material | Stainless Steel, Hastelloy C, Tantalum, Platinum |
| Fluid temperature | Up to 180 °C (356 °F) depending on liner |
| Communication | HART, FOUNDATION Fieldbus, PROFIBUS PA |
| Approvals | ATEX, IECEx, FM, CSA, SIL |
| Diagnostics | empty pipe detection |
| Output Signal | 4-20 mA, pulse, frequency |
| Power Supply | 100 to 240 V AC, 24 V AC/DC |
| Process Temperature Range | -40°C to +180°C (depending on lining material) |
| Ambient Temperature Range | -40°C to +60°C |
| Protection Class | IP67, IP68 |
| Material | Carbon steel, stainless steel |
| Flow Rate Range | 0.03 to 12 m/s (0.1 to 39 ft/s) |
To Next Page
