ABB Power2 340-H44 - Fig. 32: Installing the Cartridge Group on the Service Support; Installing the Cartridge Group on the Service Support

Operation Manual / Power2 340-H / Low-pressure stage
9 Disassembly and assembly / 9.11 Installing the cartridge group on the
service support
© Copyright 2022 ABB. All rights reserved. HZTL4053_EN Rev.F March 2022
9.11 Installing the cartridge group on the service
support
Fig.32: Installing the cartridge group on the service support
1. Remove ring nuts(VRM).
2. Remove service support screws.
3. Fit service support(90012) according to the illustration.
4. Insert the cartridge group.
5. Fit the nuts.
Page 79 / 122