ABB PSR User Manual

1SFC132005C0201, rev.F | Softstarters 27
PSE – The efficient range
Description
The PSE Softstarter can be selected
according to the rated motor power
in normal duty applications like
pumps, compressors, elevators,
escalators, short conveyor belts and
bow thrusters. See page 30.
For heavy duty applications like
centrifugal fans, crushers, mixers,
mills, stirrers and long conveyor
belts, select a softstarter from page
31.
3 output signal relays
(RUN, TOR, Event)
Screw mounting
Input for reset of faults
Analog output
Built-in by-pass
All data available
on the front
External keypad with same
design as the xed HMI
Settings
Green ready LED
Flashing - Suppy available
Steady - Main available
Green run LED
Flashing - Ramping up/down
Steady - TOR
Yellow protection LED
Red fault LED
Back-lit display
User friendly keypad
Similar as for PST(B)
Four digits showing
values and messages
Icon’s showing functions.
Language neutral

ABB PSR Specifications

General

Type	PSR
Protection Class	IP20
Category	Controller
Rated control supply voltage	24 V DC
Certifications	CE
Operating Temperature	-25°C to +55°C