ABB REF 542plus - Ethernet Communication Page

101
20.6.4.8. Ethernet communication page
When the Ethernet module is applied, the following subpages appear after you select
the corresponding Ethernet communication submenu, depending on the actual
condition. The following Fig. 20.6.4.8.-1 shows a case where the Ethernet board is
not supported:
A070398
Fig. 20.6.4.8.-1 Subpage if Ethernet board is not supported
The next Fig. 20.6.4.8.-2 shows a case where there is no Ethernet module present.
Multifunction Protection and Switchgear Control Unit
Operator's manual
REF 542plusREF 542plus
1MRS755869