By selecting the row related to port 1 or 2 and pressing , it is possible to change
the port communication address.
20.6.4.5. CAN communication page
When the CAN port has been enabled the following pages display the CAN
communication settings.
The CAN communication may only be used by ABB switchgear
companies.
A051649
Fig. 20.6.4.5.-1 CAN communication port page
Only channel 1 is currently available. To enter the next subpage, select Channel 1
and press ENTER
. The following page is displayed.
96
REF 542plusREF 542plus
Multifunction Protection and Switchgear Control Unit
Operator's manual
1MRS755869
To Next Page
Loading...
