ABB REG650 - Basic IED Functions

IEC 61850 or Function
name
ANSI Function description Generator
REG650
REG650 (B01)
Gen diff
REG650 (B05)
Gen+Trafo diff
OPTICAL103 IEC60870-5-103 Optical serial communication 1 1 1
RS485103 IEC60870-5-103 serial communication for RS485 1 1 1
GOOSEINTLKRCV Horizontal communication via GOOSE for
interlocking
59 59 59
GOOSEBINRCV GOOSE binary receive 4 4 4
ETHFRNT
ETHLAN1
GATEWAY
Ethernet configuration of front port, LAN1 port and
gateway
1 1 1
ETHLAN1_AB Ethernet configuration of LAN1 port 1
PRPSTATUS System component for parallell redundancy protocol 1
CONFPROT IED Configuration Protocol 1 1 1
ACTIVLOG Activity logging parameters 1 1 1
SECALARM Component for mapping security events on protocols
such as DNP3 and IEC103
1 1 1
AGSAL Generic security application component 1 1 1
GOOSEDPRCV GOOSE function block to receive a double point value 32 32 32
GOOSEINTRCV GOOSE function block to receive an integer value 32 32 32
GOOSEMVRCV GOOSE function block to receive a measurand value 16 16 16
GOOSESPRCV GOOSE function block to receive a single point value 64 64 64
2.5 Basic IED functions
IEC 61850/Function
block name
Function description
Basic functions included in all products
INTERRSIG Self supervision with internal event list 1
SELFSUPEVLST Self supervision with internal event list 1
TIMESYNCHGEN Time synchronization 1
SNTP Time synchronization 1
DTSBEGIN, DTSEND,
TIMEZONE
Time synchronization, daylight saving 1
IRIG-B Time synchronization 1
SETGRPS Setting group handling 1
ACTVGRP Parameter setting groups 1
TESTMODE Test mode functionality 1
CHNGLCK Change lock function 1
PRIMVAL Primary system values 1
Table continues on next page
1MRK 502 049-UEN A Section 2
Available functions
19
Commissioning manual