IEC18000080 V1 EN-US
Figure 40: Through fault monitoring tool
Through fault reports table
GUID-E64AF177-D3FA-434A-86D2-589C0607D6D7 v1
The through fault reports table is an overview of fault reports. It displays the available fault
reports from the IED. It is possible to select a specific through fault and create a list view for
that specific through fault. The through fault reports table contains the latest 100 records per
function block instance.
IEC18000081 V1 EN-US
Figure 41: Through fault reports table
As shown in Figure 41, the through fault reports table consist of Instance number, Fault
number, and Date and time columns respectively.
• The Instance number column contains data related to the function block instance number.
• The Fault number column contains serial number of the fault reports.
• The Date and time column shows the date and time when the fault has occurred.
Section 7 1MRK 500 127-UEN D
Operating procedures
58 670 series
Operation manual
To Next Page
Loading...
