REM610C55HSNS 01
RTD/Thermistor module:
M = included
N = none
Power supply:
H = 100-240 V AC/110-250 V DC,
2xDI (110/125/220/250 V DC),
3xPO
2xSO
L = 24-60 V DC,
2xDI (24/48/60/110/125/220/250 V DC),
3xPO,
2xSO
Earth-fault current input:
5 = 5A
1 = 1A
Phase-current inputs:
5 = 5A
1 = 1A
Language set:
01 = (IEC) English, Svenska, Suomi
02 = (IEC) English, Deutsch, Francais, Italiano, Español, Polski
11 = (ANSI) English, Español, Portugese
A051553_2
Fig. 7.-2 Ordering key for spare units
The following accessories are available:
Item Order number
Semi-flush mounting kit 1MRS050696
Inclined (/ 25º) semi-flush mounting kit 1MRS050831
Wall mounting kit 1MRS050697
19” Rack mounting kit, two relays side-by-side 1MRS050695
19" Rack mounting kit, single relay 1MRS050694
19" Rack mounting kit, single relay and RTXP18 (REM 610) 1MRS090938
19" equipment frame mounting kit (Combiflex), single relay
and RTXP18 (REM 610)
1MRS090924
19" equipment frame mounting kit (Combiflex), single relay 1MRS050779
Front communication cable 1MRS050698
Communication modules:
*
Plastic fibre 1MRS050889
*
RS-485 1MRS050892
*
Plastic and glass fibre 1MRS050891
146
REM 610REM 610
Motor Protection Relay
Technical Reference Manual - ANSI Version
1MRS755537
To Next Page
Loading...
