145
7. Ordering information
When ordering protection relays and/or accessories, specify the following:
*
Order number
*
HMI language set number
*
Quantity
The order number identifies the protection relay type and hardware as described in
the figures below and is labelled on the marking strip under the lower handle of the
relay.
Use the ordering key information in Fig. 7.-1 to generate the order number when
ordering complete protection relays.
REM610C55HCMP 01
Communication module:
P = plastic fiber
G = plastic and glass fiber
R = RS-485
N = none
RTD/Thermistor module:
M = included
N = none
Power supply:
H = 100-240 V AC/110-250 V DC,
2xDI (110/125/220/250 V DC),
3xPO
2xSO
L = 24-60 V DC,
2xDI (24/48/60/110/125/220/250 V DC),
3xPO,
2xSO
Earth-fault current input:
5 = 5A
1 = 1A
Phase-current inputs:
5 = 5A
1 = 1A
Language set:
01 = (IEC) English, Svenska, Suomi
02 = (IEC) English, Deutsch, Francais, Italiano, Español, Polski
11 = (ANSI) English, Español, Portugese
Revision
A051552_2
Fig. 7.-1 Ordering key for complete relays
Use the ordering key information in Fig. 7.-2 to generate the order number when
ordering spare units.
Motor Protection Relay
Technical Reference Manual - ANSI Version
REM 610REM 610
1MRS755537
To Next Page
Loading...
