Section 18 Basic IED functions
18.1 IED identifiers TERMINALID
IP15060-1 v2
18.1.1 Application
M15324-3 v6
IED identifiers (TERMINALID) function allows the user to identify the individual
IED in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit
names.
18.2 Product information PRODINF
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
18.2.1 Application
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v8
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers:
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
This information is very helpful when interacting with ABB product support (for
example during repair and maintenance).
18.2.2 Factory defined settings
M11789-39 v10
The factory defined settings are very useful for identifying a specific version and
very helpful in the case of maintenance, repair, interchanging IEDs between
different Substation Automation Systems and upgrading. The factory made settings
can not be changed by the customer. They can only be viewed. The settings are
1MRK 504 169-UEN A Section 18
Basic IED functions
Transformer protection RET650 2.2 IEC 341
Application manual
To Next Page
Loading...
