8
1MRS 751108-MUM
Protection Relay
Technical Reference Manual, General
REX 521
Tool-specific manuals
1.6. Document revisions
1.7. Safety information
• CAP505 Installation and Commissioning Manual 1MRS751273-MEN
• CAP505 Operator’s Manual 1MRS751709-MEN
• CAP505 Protocol Mapping Tool Operator’s Manual 1MRS755277
• Tools for Relays and Terminals, User’s Guide 1MRS752008-MUM
• CAP 501 Installation and Commissioning Manual 1MRS751270-MEN
• CAP 501 Operator’s Manual 1MRS751271-MUM
Version Date History
E 22.6.2004 - Manual updated to include DNP 3.0
- Fig. 4.1.1.4.-1 updated
- Fig. 4.1.12.8.-1 updated
- Cable type updated in Table 4.2.1-9
- Fig. 6.-1 updated
- Section 7. updated
- Table 9.5.-1 updated
F 10.8.2004 - Table in 2.2. updated
Dangerous voltages can occur on the connectors, even though the
auxiliary voltage has been disconnected.
National and local electrical safety regulations must always be
followed.
The device contains components which are sensitive to electrostatic
discharge. Unnecessary touching of electronic components must
therefore be avoided.
The frame of the device has to be carefully earthed.
Only a competent electrician is allowed to carry out the electrical
installation.
Non-observance can result in death, personal injury or substantial
property damage.
Breaking the sealing tape on the upper handle of the device will result
in loss of warranty and proper operation will no longer be guaranteed.
When the plug-in unit has been detached from the case, do not touch
the inside of the case. The relay case internals may contain high
voltage potential and touching these may cause personal injury.
!
To Next Page
Loading...
Need help?
General
