ABB RMC-100 - 10 Enable for MQTT Support; Figure 9-5: TFIO-B Module List

36 | RMC-100 | 2105551MNAD
Figure 9-5: TFIO-B Module List
f. For specific module setup, expand either TFIO-A Modules or TFIO-B Modules on the
navigation tree and select the desired modules for further configuration.
10 Enable for MQTT support
MQTT supports connection of the RMC-100 to a service provider or private cloud. It may require
authentication certificates for the device. Consult with your IT administrator for configuration options or
requirements when using certificates.
NOTICE
– Cybersecurity risk: The RMC-100 is not an internet-facing device. Do not connect
directly to the Internet. An MQTT gateway is required
between the Digital Oilfield and the RMC. If
the customer’s corporate network firewall is compromised, the RMC
-100 would be at risk without
the MQTT gateway.
Enable MQTT and REST (MQTT configuration interface):
1. On the PCCU Entry mode navigation tree, select Communications>Services (Figure 10-1
).