Technical data
112
Software settings:
• Input/Output/User Parameter data/Diagnostics format
• Maximum cyclic I/O data size: 28 bytes in, max 28 bytes out,
max. 56 bytes total
• Maximum acyclic I/O data size: 240 bytes in, max. 240 bytes
out, max. 480 bytes total
• Maximum User Parameter data/Diagnostics length: 26 bytes
Connectors:
• 34-pin parallel bus connector
• 9-pin female DSUB connector
Current consumption:
• 350 mA max. (5 V), supplied by the control board of the drive
General:
• Estimated min. lifetime: 100 000 h
• All materials UL/CSA-approved
• Complies with EMC standards EN 50081-2 and EN 50082-2
To Next Page
Loading...
