RTAC-01 User’s manual 1-1
Chapter 1 – Introduction
Intended
audience
The manual is intended for the people who are
responsible for commissioning and using an RTAC-01
Pulse Encoder Interface module with the ACS 800
drive. The reader is expected to have a basic
knowledge of electrical fundamentals, electrical wiring
practices and how to operate the drive.
Before you start
It is assumed that the drive is installed and ready to
operate before starting the installation of the extension
module.
In addition to conventional installation tools, have the
drive manuals available during the installation as they
contain important information not included in this
manual. The drive manuals are referred to at various
points of this document.
To Next Page
Loading...
