ABB | SACE Emax 2
10 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D Management operations | 2 - Unpacking and handling
2 - Unpacking and handling
Opening the packaging
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped packaging
pouch.
The following is the procedure for opening the packaging:
1. Cut the bands that wrap the packing box. See Figure 6 and Figure 7.
Figure 6
Figure 7
2. Open the upper part of the packing box. See Figure 8.
3. Remove the packing box by lifting it upwards. See Figure 9.
Figure 8
Figure 9
Continued on the next page
To Next Page
Loading...
