ABB | SACE Emax 2
48 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D Accessories | 1 - Overview
Accessories
1 - Overview
Overview and connection
Emax 2 circuit-breakers have a set of electronic, electrical and mechanical accessories, the availability of
which depends on the CB model.
Consult manual 1SDH001330R1002 for details, circuit diagrams 1SDM000091R0001 and assembly
instructions for the connection.
Electronic accessories
Electronic accessories for Ekip Dip:
Name Mounting Function
Rating Plug
(1)
Front Defines rated current In
Ekip Supply Terminal box Power supply of Trip unit and modules in terminal box
Ekip Link
(2)
Terminal box
Communication between Trip units via an intranet with ABB
proprietary protocol
Other external modules and accessories:
Name Function
Ekip Signalling 10K Programmable digital inputs/outputs
Ekip Multimeter Panel front display
External neutral Sensor for protecting the external neutral line with 3P circuit-breaker
In addition, the supervision, configuration and reporting functions are provided by further modules for
temporary communication and supply:
Name Function
Ekip TT Supply and tests
Ekip T&P Supply, communication, programming and tests
Ekip Programming Supply, communication and programming
Ekip Bluetooth Key Bluetooth communication and programming
(1)
assembled by default at the time of order; can be replaced afterwards with a model of a different size
(2)
always supplied for contacts Ekip AUP and Ekip RTC
To Next Page
Loading...
