ABB SACE Tmax XT7 - Page 171

ABB | SACE Tmax XT
External electronic accessories | 10 - Ekip Com Hub169 | © 2020 ABB | 1SDH001821A1002 - ECN000135670
Remote information
Additional information can be accessed via the service connector (via Ekip Connect) or via a system bus
communication:
Information Description
HW and Boot version General module information
Flash CRC status and result Information about the correctness of the SW in the module
Publish enable configuration State of enabling in Security File
Configuration file
Name of the file dedicated to the information to transmit
(measurements, etc.)
Security file
Name of the file dedicated to the information requested by the module
for transmission purposes (addresses, certificates, etc.)
Certificate Revocation List Name of the file containing the revoked certificates
Executable file Name of the executable firmware update file
Configuration error Module configuration error state
Sample time Period of data acquisition from the connected devices
Log time Period within which the acquired data are saved in the log
Upload time Period (calculated by the module) between each data transmission
Configured device Number of modules involved in the network with Hub module
Polling period API events Period in which the module communicates with the API device
Connection client 1, 2, 3 Address of TCP modbus clients connected to the module
Statistics
Recordings of the latest saving operations and percentage of
resources being used
Status plant side
Information about the quality of the communication with the other
devices
Status Cloud side
State of the errors concerning the TLS session established between
module and server
Application status Operation progress indicators
Status
General indicators of the module: SNTP status, flash, cable
connection, FW availability, file errors, etc.