ABB | SACE Tmax XT
70 | © 2020 ABB | 1SDH001821A1002 - ECN000135670 Protections | 13 - Protection Adaptive
13 - Protection Adaptive
The Adaptive Protection package is available by default for Ekip Hi-Touch, Ekip M Touch and Ekip G Hi-Touch
and configurable in the remaining models as additional SW package.
The protection is described below:
Dual Set
The function enables two different protection configurations to be made, one as an alternative to the other,
by means of a set change with programmable events.
The function can be activated in the Settings-Dual Set menu (page 37)
Parameter Description Default
Enable Activates/deactivates the function OFF
Default Set
Defines the sets of main and secondary protections (which activate in
the presence of the programmed event)
Set A
The event that determines set change (from default to secondary) can be programmed in the Advanced -
Functions menu, see the paragraph Programmable Functions and Commands (page 84).
To Next Page
Loading...
