ABB | SACE Tmax XT
Ekip Touch - Interface and menus | 3 - Graphic pages33 | © 2020 ABB | 1SDH001821A1002 - ECN000135670
Diagnosis bar and Alarm list
The Diagnosis bar lists the faults detected by the unit. It shows a detail of each alarm for about two seconds.
Figure 19
Select the bar to access the Alarm List page, with the list of alarms present.
Figure 20
NOTE: the Alarm List page also appears when the iTEST button is pressed in the cases
provided for and described on page 27
Each signal is followed by an icon that identifies the type of alarm:
Icon Alarm type
Alarm
Warning, error or prealarm
About
Timing due to tripped protection
The complete list of alarms is given on page 19.
To Next Page
Loading...
