Section 5 SAM600 Engineering
5.1 Parameter setting tool
GUID-749A1D1F-4579-4C9E-9276-4DFAA1FCCE61 v1
It is possible to read the Parameters from the SAM600 system using Parameter Setting Tool
(PST), see Figure 23. Parameters read from the SAM600 system are displayed in the IED Value
field of PST, see Figure 24. For more details, see PCM600 online help. Also the parameters in
PCM600 can be modified using PST.
To export parameters from PST, both XRIO and CSV file formats are supported.
IEC18000653 V1 EN-US
Figure 23: Parameter Setting Tool
1MRK 511 433-UEN B Section 5
SAM600 Engineering
SAM600 Process Bus I/O System 25
Engineering manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
