The maximum length of the technical key for IEC 61850 Edition 2 is 64
characters, where the recommended length is less than 32
characters.
2. Click the OK button to confirm the selection. It is not possible to set a user defined name
or select the Technical Key in SAM600 system if the value already exists in the PCM600
project. A warning message is displayed on adding the duplicate technical key.
4.6.2 SAM600 serial numbers
GUID-4E55A0DC-E495-43CA-A76C-15C3D4CAC2D1 v1
The Serial Number of a SAM600 module is a global unique module identifier within the module
type. The serial numbers of SAM600 modules have to be entered before writing the
configuration to a SAM600 system.
The serial number can be set using one of the following scenarios:
• SAM600 System Configuration Wizard (only in offline mode), see
Figure 17.
• Composition Upgrade Tool
• PCM600 Object Properties
• Get Serial Number command at a SAM600 system level (only in online mode)
If the entered serial number is incorrect, the appropriate validation errors
are displayed.
Section 4 1MRK 511 433-UEN B
Setting up a project
24 SAM600 Process Bus I/O System
Engineering manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
