IEC18000693 V1 EN-US
Figure 21: Set technical key menu at a SAM600 system level
A dialog box appears with the technical key concept information.
1. Click the OK button. PCM600 reads technical key from a SAM600 system and the technical
key editor dialog box appears, see
Figure 22.
IEC18000652 V1 EN-US
Figure 22: PCM600: Technical key editor
The following selections are possible using the Technical Key Editor.
• Use the existing technical key in SAM600 system
• Use the existing technical key defined for a SAM600 system object in PCM600
• Set a user defined technical key, which changes the technical key for both the
physical SAM600 system and SAM600 system object in PCM600
1MRK 511 433-UEN B Section 4
Setting up a project
SAM600 Process Bus I/O System 23
Engineering manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
