1 - 10 WBPEEUI240774A0
Specifications
CE mark declaration
EMC96 Directive 89/336/EEC
Low Voltage Directive 73/23/
EEC
This product, when installed in a Symphony cabinet, complies
with the following Directives/Standards for CE marking.
EN50082-2 Generic Immunity Standard - Part 2: Industrial
Environment
EN50081-2 Generic Emission Standard - Part 2: Industrial
Environment
EN61010-1 Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use - Part 1: General
Requirements
Certifications
CSA (pending)
Factor y Mutual (FM)
(pending)
Certified for use as process control equipment in an ordinary
(nonhazardous) location.
Approved as nonincendive equipment for use in Class I; Division
2; Groups A, B, C, D; hazardous location.
NOTE:
1. Absolute maximum ratings indicate limits beyond which damage to the device may occur and device operation is not guaran-
teed.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Table 1-4. S pec ification s (continued)
Property Characteristic/Value
To Next Page
Loading...
