Additional information
Additional free publications for the µFLO
G5
are available for download at
www.abb.com/totalflow or by scanning this code:
µFLO
G5
flow computer user manual 2105614
µFLO
G5
flow computer startup guide 2105513
µFLO
G5
upgrade kit
2105515
µFLO
G5
flow computer data sheet 2102800
µFLO
G5
(2104939 BD) wiring guide 2105507
µFLO
G5
enclosure measurements 2105508
µFLO
G5
I/O expansion board (2104395 BD) installation and wiring guide 2105506
µFLO
G5
(2104939 BD) solar panel connection 2105509
NRTL/C (Class 1, Div 2) 60 °C 2015246
NRTL/C (Class 1, Div 2) 70 °C 2104615
ATEX Cert, EX II 3G, Ex nA IIB (Zone 2) 2104152
IECEx Cert, Ex nA IIB (Zone 2) 2100750
Assumptions
For any questions that are not answered in this guide or the other documentation
listed in the previous section, call the local ABB representative, or call the main office
number listed on the back page of this guide.
The following apply to the instructions in this guide:
— A µFLO
G5
flow computer is already installed and the replacement parts are
suitable.
— The host computer is running PCCU32 version 7.58 or newer.
— Specific instructions about collecting data, shutting in the measurement sensor,
disconnecting the high and low input lines, and manifold connections are outside
the scope of this document. At the appropriate times, guidelines prompt when
these procedures are to be performed.
To Next Page
Loading...
Need help?
General
