Operation Manual / TPS44-F.. - TPS61-F..
2 Safety / 2.6 Safe operation and maintenance
© Copyright 2020 . All rights reserved. HZTL2412_EN Rev.G March 2020
Work safety and work area safety
WARNING
Risk of falling
There is the risk that someone can fall when working on the turbochar-
ger.
u Do not climb on the turbocharger or on parts attached to it or use
these as climbing aids.
u When working at levels above the head, use climbing aids and work
platforms suitable for this purpose.
u Observe all general regulations for the prevention of accidents.
u Do not work on the turbocharger if you are under physical or mental
stress.
u Work only with suitable tools as well as equipment and working ma-
terials that are in perfect condition.
u Electric tools must be solidly earthed, and connecting cables may not
be damaged.
u Keep the workplace clean, clear away loose objects and remove
obstacles on the floor.
u Keep the floor, equipment and the turbocharger clean.
u Have oil binding materials ready at hand and keep oil catch pans
ready or in position
u Eliminate leaks.
u Keep fire-protection materials and fire-extinguishing equipment
ready.
Welding work close to the turbocharger
u If welding work is being carried out in the vicinity of the turbocharger,
cover the filter silencer so that the filter mat is not damaged.
u Remove combustible objects and substances out of the range of fly-
ing sparks.
u Cover all connections on the turbocharger so that no foreign objects
can get into the turbocharger.
u Wear personal protective equipment (PPE) for welding operations.
Page 17 / 113
To Next Page
Loading...
Need help?
General
