Operation Manual / TPS44-F.. - TPS61-F..
Expected exchange intervals
Page 49
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2412_EN Revision F
The specified values are only guide values and not guaranteed. The actu-
al values can deviate considerably from the guide values due, for exam-
ple, to the following influences:
Fuel quality and preparation
Load profile (thermal load cycles, also starts / stops, emergency shut-
downs)
Gas inlet temperature
Frequency and execution of turbine and compressor cleaning
Turbocharger specification
System-specific operating conditions (operating point, combustion
quality, composition of exhaust gas)
For bearing parts
Lubricating oil quality (oil filtration, condition of lubricating oil, oil moni-
toring)
Load profile (rpm / speed, pressure conditions, temperature)
State of rotor unbalance (degree of contamination)
To Next Page
Loading...