ABB TPS57-F32 - Disassembling and Assembling Turbocharger

Operation Manual / TPS44-F.. - TPS61-F..
Disasse
mbly and assembly
8
Disassembling and assembling
turbocharger
8.3
Page 95
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2412_EN Revision F
Disassembling and assembling turbocharger
8.3
Removing the compressor casing
WARNING
Risk of burning
Touching hot surfaces or contact with hot operating materials can lead
to serious burns.
 Do not touch hot surfaces and heed the warning plate on the turbo-
charger.
 Wear heat-resistant safety gloves and protective clothing.
 Allow the turbocharger to cool down before carrying out any work.
Wear safety gloves to protect against thermal hazards.
 Disconnect all air lines in accordance with the enginebuilder’s instruc-
tions.
 Remove the screws for the compressor casing insulation and disman-
tle the insulation.
 Undo the V-clamp (72020) and remove the filter silencer (81000) or air
suction branch (82000).
8.3
If provided