ABB TTF200 Operating Instruction

—
ABB MEASUREMENT & ANALYTICS | OPERATING INSTRUCTION
TTF200
Field-mount temperature transmitter
Measurement made easy
Additional Information
Additional documentation on TTF200 is available
free of charge for downloading at
www.abb.com/temperature.
Alternatively, scan this code:

ABB TTF200 Specifications

General

Type	Temperature Transmitter
Output	4-20 mA, HART
Accuracy	±0.1% of span
Housing Material	Aluminum, Stainless Steel
Communication Protocol	HART
Material	Stainless steel, Aluminum
Input	RTD, Thermocouple, mV
Ambient Temperature	-40°C to +85°C
Configuration	Via HART communicator
Power Supply	10.5 to 42 V DC
Measurement Range	Depends on sensor type
Protection Rating	IP66
Operating Temperature	-40 to 85°C (-40 to 185°F)