26 TTF200 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF200-EN REV. A
7.4.2 Factory settings
The transmitter is configured at the factory. The table below contains the relevant parameter values.
Menu Designation Parameter Factory setting
Device Setup Write protection - No
Input Sensor Type Pt100 (IEC60751)
R-Connection Three-wire circuit
Measured Range Begin 0
Measured Range End 100
Engineering Unit Degrees C
Damping Off
Process Alarm Fault signaling Overrange 22 mA
Change from one to tw o columns
To Next Page
Loading...
