All the installation, putting into service,
running and maintenance operations
must be carried out by skilled personnel
with in-depth knowledge of the
apparatus.
—
I. Introduction
This publication contains the information needed to
install medium voltage Vmax circuit breakers and put
them into service.
For correct use of the product, please read it
carefully.
Like all the apparatus we manufacture, the Vmax
circuit breakers are designed for different installation
configurations.
Furthermore, this apparatus allows further technical
and construction modifications (at the customer’s
request) to adapt to special installation
requirements.
Consequently, the information given below may
sometimes not contain instructions concerning
special configurations.
Apart from this manual, it is therefore always
necessary to consult the latest technical
documentation (circuit and wiring diagrams,
assembly and installation drawings, any protection
coordination studies, etc.), especially regarding any
variants requested in relation to the standardised
configurations. Only use original spare parts for
maintenance operations.
For further information, please also see the technical
catalogue of the circuit breaker and the spare parts
catalogue.
—
II. Environmental protection programme
The Vmax circuit breakers are manufactured in
accordance with the ISO 14000 Standards (Guidelines
for environmental management).
The production processes are carried out in
compliance with the Standards for environmental
protection in terms of reduction in energy
consumption as well as in raw materials and
production of waste materials. All this is thanks to
the medium voltage apparatus manufacturing facility
environmental management system.
To Next Page
Loading...
Need help?
General
