When a period of storage is foreseen, our work-shops
can (on request) provide suitable packing for the
specified storage conditions.
On receipt the apparatus must be carefully unpacked
and checked as described in Checking on receipt
(chap. 2).
If immediate installation is not possible, the packing
must be replaced, using the original material
supplied.
Insert hygroscopic packets inside the packing, with
at least one standard packet per piece of apparatus.
Should the original packing not be available and
immediate installation is not possible, store in a
covered, well-ventilated, dry, dust-free, non-corrosive
ambient, away from any flammable materials and at a
temperature between –5 °C and +40 °C.
In any case, avoid any accidental impacts or
positioning which stresses the structure of the
apparatus.
—
3. Storage
To Next Page
Loading...
Need help?
General
