68
1
Zenith ZTG Series ATS, OPERATION, MAINTENANCE, AND INSTALLATION GUIDE
5.6.3 Ekip Com DeviceNet -module
The Ekip Com DeviceNet –module is a
communication accessory module, that
integrates the automatic transfer switch
in an industrial remote supervision and
control network. The module is suitable
for all ZTG(D) 30-1200 A, 200-480 Vac au-
tomatic transfer switches.
It can be connected to a CAN network
with a DeviceNet
TM
communication proto-
col, and allows you to:
• Connect the automatic transfer switch
as a slave to the network, with dialog
functionality.
• Provide the status information of the
automatic transfer switch (e.g. open,
closed).
For the communication lines, Belden type
3084A or equivalent cables must be used.
—
Fig. 5.17 Ekip Com DeviceNet -module
LCD, TOUCH
To Next Page
Loading...
