6 | Manual ZX0 HB 600 en - Revision 05
The relevant standards for switchgear over 1 kV and their switching devices
IEC
Switchgear 62271-1 Common specifications for high-voltage switchgear and controlgear standards
Switchgear 62271-200
High-voltage switchgear and controlgear, Part 200: A.C. metal-enclosed switchgear and
controlgear for rated voltages above 1 kV and up to and including 52 kV
Circuit-breaker 62271-100
High-voltage switchgear and controlgear
Part 100: High voltage alternating current circuit-breakers
Disconnector and earthing switch 62271-102
High-voltage switchgear and controlgear
Part 102: Alternating current disconnectors and earthing switches
Switch disconnector 60265-1 High-voltage switches - Part 1: Switches for rated voltages above 1 kV and less than 52 kV
Switch disconnector – fuse
combination
62271-105
High-voltage switchgear and controlgear
Part 105: Alternating current switch-fuse combinations
HRC - fuses 60282 High-voltage fuses - Part 1: Current-limiting fuses
Take particular account of the relevant standards listed below. Observe the national technical specifications and the accident prevention
regulations of the country in which the switchgear is operated.
IEC 60364 Low-voltage electrical installations
IEC 61936 Power installations exceeding 1 kV a.c.
DIN EN 50110 Operation of electrical installations
National technical accident prevention regulations e.g. for electrical systems and equipment and SF
6
installations
To Next Page
Loading...
