Manual ZX0 HB 600 en - Revision 05 | 71
9.3 Accessories
ABB part number
Accessories for operation of the three position disconnectors
Manual mechanism 1
Operating lever (figure 4.1.2.1.2.1) GCE9401549R0103
Manual mechanism 2 and motor operated mechanism 2
Crank for earthing function of the three-position disconnector (figures 4.1.2.2.2.1 and 4.1.2.4.3.1) GCE7007715R0102
Crank for disconnector function of the three-position disconnector (figures 4.1.2.2.2.1 and 4.1.2.4.3.1) GCE7007715R0101
Motor operated mechanism 1
Crank for emergency manual operation (figure 4.1.2.3.1.2) GCE7006002R0103
Accessories for operation of the three position switch-
disconnector and three position switch-disconnector with fuse
Operating lever (figures 4.2.2 and 4.3.2) GCE9401549R0103
Operating lever with coding pin (figures 4.2.3 and 4.3.3) GCE9016169R0101
Accessories for HRC fuses
Length adapter for fuse length 292 mm
and diameter 53 mm (figure 4.3.4.2) GCE9015980R0101
Adapter for fuse diameter 53 mm (figure 4.3.4.2) GCE9015982R0101
Fuse links (ABB type CEF or Siba):
HRC fuse links for indoor switchgear
with striker pin 80 N
and temperature limiter, On request, depending
nominal dimension “e”: 442 mm (or 292 mm with adapter) on rated voltage
nominal dimension “d”: 67 mm (or 53 mm with adapter) and rated current
Accessories for capacitive indicator, system LRM
Display unit (figure 5.1.1.1) GCE0931333P0101
Interface tester GCE0900052P0102
Short-circuiting plug GCE0909005P0101
Other accessories
Double bit key for barrel lock in panel door GCE0990108P0100
Wall mounting for accessories GCE9016025P0101
Wall mounting for three HRC fuses GCE9016382P0102
Adapter for DILO filling truck 1VB8000532R0101
To Next Page
Loading...
