What it may mean: The Sensor is unable to provide a glucose reading during the
start-up period.
What do to: Check again after the duration specified on the screen.
Display: Replace Sensor
What it may mean: The App has detected a problem with your Sensor.
What to do: Apply and start a new Sensor.
Display: Check Sensor
What it may mean: The Sensor tip may not be under your skin.
What do to: Try to start your Sensor again. If you see “Check Sensor” again on the
screen, your Sensor was not applied properly. Remove this Sensor and apply and
start a new Sensor.
Display: Sensor Ended
What it may mean: Your Sensor has ended.
What to do: Apply and start a new Sensor.
Display: Signal Loss
What it may mean: Sensor has not automatically communicated with the App in
the last 5 minutes.
What to do: Make sure your phone is within 33 feet of the Sensor and you have not
force closed the App. Tap the
symbol for more information. Try turning
To Next Page
Loading...
