from 8AM to 8PM Eastern Standard Time.
Do not reuse Sensors. The Sensor and Sensor Applicator are designed for single
use. Reuse may result in no glucose readings and infection. Not suitable for re-
sterilization. Further exposure to irradiation may cause unreliable low results.
If a Sensor breaks inside your body, call your health care professional.
How to Store the Sensor Kit:
Store the Sensor Kit between 36°F and 82°F. Storage outside of this range may
cause inaccurate Sensor glucose readings.
If you suspect that the temperature may exceed 82°F (for example, in an un-
airconditioned home in summer), you should refrigerate your Sensor Kit. Do not
freeze your Sensor Kit.
Store your Sensor Kit in a cool, dry place. Do not store your Sensor Kit in a
parked car on a hot day.
Store the Sensor Kit between 10-90% non-condensing humidity.
When not to use the System:
Do NOT use if the Sensor Kit package or Sensor Applicator appear to be
damaged or if tamper label indicates Sensor Applicator has already been
opened.
Do NOT use if Sensor Kit contents are past expiration date.
What to know about the System:
The FreeStyle Libre 3 System is intended for use by a single person. It must not
be used by more than one person due to the risk of misinterpreting glucose
information.
What to know before you Apply the Sensor:
Wash application site on the back of your upper arm using a plain soap, dry, and
then clean with an alcohol wipe. This will help remove any oily residue that may
prevent the Sensor from sticking properly. Allow site to air dry before
To Next Page
Loading...
Need help?
General
