American Beer Equipment 2001 SW 6
th
St.
Lincoln, NE 68522
19
i. Seaming
i. Make sure the roller heights are correct before checking the first operation seam specification.
Without a correct “foundation”, the rest of the seam will likely not be correct.
ii. Just because the second operation dimensions are correct, does not mean the cover hook and
body hook are correct. It is the responsibility of the customer to ensure proper seams as
specified by the lid manufacturer.
iii. Please view a very thorough video on seaming from Crown: DBL Seamer Training
(https://www.youtube.com/watch?v=WGyb-wknUSY)
A. If you watch the above, you will have a very high understanding of the entire
seaming process.
B. Seaming is not a scary process if a few minutes are taken to learn how it works.
To Next Page
Loading...