Abit Fatal1ty FP-IN9 SLI User Manual

BIOS Setup
FP-IN9 SLI 2-7
2.3 Advanced BIOS Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Quick Power on Self Test Enabled Item Help
►
CPU Feature Press Enter
►
Hard Disk Boot Priority Press Enter
First Boot Device Floppy
Second Boot Device Hard Disk
Third Boot Device CDROM
Boot Other Device Enabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Security Option Setup
MPS Version Ctrl For OS 1.4
Delay For HDD (Secs) 0
Full Screen Logo Show Enabled

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Quick Power On Self Test
When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on
the system. The BIOS shorten or skip some check during the POST.
 CPU Feature
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
CPU Feature
EIST Function Auto Item Help
Thermal Control Enabled
Limit CPUID MaxVal Disabled
Execute Disable Bit Enabled
Virtualization Technology Enabled

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
EIST Function
This item appears only for certain processors with the EIST (Enhanced Intel SpeedStep
Technology) Function. When set to [Enabled], EIST will dynamically switch between multiple
frequency and voltage points to optimize the power and performance balance of the processor
and system based on demand.

Abit Fatal1ty FP-IN9 SLI Specifications

General

Brand	Abit
Model	Fatal1ty FP-IN9 SLI
Category	Motherboard
Language	English