3-16 Chapter 3
Onboard IDE-1 Controller/Onboard IDE-2 Controller:
This item allows you to enable or disable the primary and secondary IDE controller. Select [Disabled] if
you want to add a different hard drive controller.
OnCip SATA:
This item enables or disables the on-chip SATA controller.
! OnChip SATA Mode:
This item determines the mode for on-chip Serial ATA.
[IDE]: The on-chip Serial ATA served as IDE mode.
[RAID]: The on-chip Serial ATA served as RAID mode.
# OnChip PCI Device:
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
OnChip PCI Device
OnChip USB Controller Enabled Item Help
- USB 2.0 Controller Enabled
X - USB Keyboard Support Via OS
X - USB Mouse Support Via OS
OnChip Audio Controller Enabled
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
OnChip USB Controller:
This option enables or disables the USB controller. If you choose to disable this item, the “USB
Keyboard Support Via” and “USB Mouse Support Via” items will not be able to select in Integrated
Peripherals menu.
! USB 2.0 Controller:
This option enables or disables the USB 2.0 controller.
! USB Keyboard Support Via:
This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS
environment.
UL8
To Next Page
Loading...
