BIOS Setup 3-13
# AGP Configuration:
Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
AGP Configuration
AGP 3.0 Transfer Mode 1x/2x/4x/8x Item Help
Fast Write Enabled
AGP Aperture Size (MB) 256
AGP Secondary Lat Timer 20h
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
AGP 3.0 Transfer Mode:
This item selects the data transfer rate of AGP device. A higher rate delivers faster and better graphics to
your system. Make sure your graphics card supports the mode you select.
Fast Write:
Two options are available: Disabled $ Enabled. The default setting is Disabled. If your AGP adapter can
support this function, then you can choose Enabled. Otherwise, choose Disabled.
AGP Aperture Size (MB):
This option specifies the amount of system memory that can be used by the AGP device. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address space.
AGP Secondary Lat Timer:
This item selects the value for AGP Secondary Latency Timer.
User’s Manual
To Next Page
Loading...
