Abit UL8 - PnP;PCI Configurations

BIOS Setup 3-21
3-7. PnP/PCI Configurations
Phoenix – Award WorkstationBIOS CMOS Setup Utility
PnP/PCI Configurations
Resources Controlled By Auto(ESCD) Item Help
x IRQ Resources Press Enter
PCI/VGA Pallete Snoop Disbaled
PIRQ_1 Use IRQ No. Auto
PIRQ_2 Use IRQ No. Auto
PIRQ_3 Use IRQ No. Auto
PIRQ_4 Use IRQ No. Auto
PIRQ_5 Use IRQ No. Auto
PIRQ_6 Use IRQ No. Auto
PIRQ_7 Use IRQ No. Auto
PIRQ_8 Use IRQ No. Auto
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Resources Controlled By:
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto(ESCD)]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the “IRQ Resources” menu.
# IRQ Resources:
Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
IRQ Resources
IRQ-3 assigned to PCI Device
IRQ-4 assigned to PCI Device
IRQ-7 assigned to PCI Device
IRQ-10 assigned to PCI Device
IRQ-11 assigned to PCI Device
IRQ-12 assigned to PCI Device
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
This item sets each system interrupt to either [PCI Device] or [Reserved].
User’s Manual