Absenicon3.0 C138 User Manual
Completely power off: Turn the power switch at the bottom of the conference screen (next to the
power interface) to the "OFF" position;
3.3 Standby steps
When the Absenicon3.0 conference screen is turned on and working normally:
Press the power button on the remote control, the screen displays "Standby (5S)" and "Shutdown".
After selecting "Standby", it will count down to 5S standby (the switch button status indicator lights up
in blue);
4. Description of Remote Control
4.1Remote control button description
To Next Page
Loading...
Need help?
General
