Absenicon3.0 C138 User Manual
7.2 Signal source access
Connect one end of the HDMI cable to the HDMI port of the Absenicon conference screen and the other end to
the PC.
8. Signal Source Switching
Users can switch between multiple signal sources in the following 3 ways.
8.1 Presentation
On the main interface of the conference screen system, click "Presentation" to enter the presentation interface.
Select the source that needs to be displayed and press the confirm button on the remote control to switch
successfully.
8.2 Remote control menu
Short press the menu button on the remote control to enter the menu.
To Next Page
Loading...
Need help?
General
