Absenicon3.0 C138 User Manual
(1) Click "Source", the source switching interface will pop up at the bottom of the screen;
(2) Select the source that needs to be displayed and press the confirm button on the remote control to switch
successfully.
8.3 Remote Control Signal Source Switching
(1) Short press the "source switch" button on the remote control, the source switch interface will pop up at the
bottom of the screen; (please refer to 5.1 button description for remote control button distribution)
(2) Select the input source that needs to be displayed and press the confirm button on the remote control to
successfully switch the input source.
To Next Page
Loading...
